Listing 1 Full SSH Cisco IOS session for bringing up and down an ISDN dialup connection

big:~ mtsouk$ ssh -c des cisco
Warning: use of DES is strongly discouraged due to cryptographic weaknesses
mtsouk@cisco's password:

isdn>en
isdn>enable
Password:
isdn#conf
isdn#configure t
isdn#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
isdn(config)#int
isdn(config)#interface br
isdn(config)#interface brI 0
isdn(config-if)#no sh
isdn(config-if)#no shutdown
isdn(config-if)#sh
isdn(config-if)#^Z
isdn#sh
isdn#show ip
isdn#show ip r
isdn#show ip ro
isdn#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
        i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
            level-2
        ia - IS-IS inter area, * - candidate default, U - per-user
             static route
        o - ODR, P - periodic downloaded static route

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

C    1.0.0.0/8 is directly connected, Loopback0
      10.0.0.0/16 is subnetted, 1 subnets
C       10.100.0.0 is directly connected, Ethernet0
S*   0.0.0.0/0 is directly connected, BRI0
isdn#
isdn#conf
isdn#configure t
isdn#conf
isdn#configure t
isdn#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
isdn(config)#int
isdn(config)#interface br
isdn(config)#interface brI 0
isdn(config-if)#sh
isdn(config-if)#shutdown
isdn(config-if)#^Z
isdn#q
Connection to cisco closed.
big:~ mtsouk$